Here you can find information on artificial crafts, bamboo and wooden crafts and candles and holders, as well as timer and poultry and livestock.


Customs Tariff Of The Russian Federation

(with the Amendments and Additions of May 30, July 15, August 12, 20, 30, 31, November 1, 12, 19, 2002, February 25, March 11, April 11, 24, 28, June 5, 20, 21, 24, July 7, 16, August 8, 27, September 10, October 18, November 11, 13, 24, 29, December 23, 24, 2003, January 23, 2004)
Adopted by the State Duma on December 20, 2001
Endorsed by the Council of Federation on December 26, 2001

Section XV
Chapter 72
Iron and Steel
Chapter 73
Articles of Iron or Steel
Chapter 74
Copper and Articles Thereof
Chapter 75
Nickel and Articles Thereof
Chapter 76
Aluminium and Articles Thereof
Chapter 78
Lead and Articles Thereof
Chapter 79
Zinc and Articles Thereof
Chapter 80
Tin and Articles Thereof
Chapter 81
Other Base Metals; Cermets; Articles Thereof
Chapter 82
Tools, Implements, Cutlery, Spoons, and Forks, of BaseMetal; Parts Thereof of Base Metal
Chapter 83
Miscellaneous Articles of Base Metal

Chapter 76. Aluminium and Articles Thereof


Note:
 1. In this Chapter the following expressions have the meanings hereby assigned to them:
  a)  "Bars and rods": rolled, extruded, drawn or forged products, not in coils, which have a uniform solid cross-section along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons (including "flattened circles" and "modified rectangles", of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel). Products with a rectangular (including square), triangular or polygonal cross-section may have corners rounded along their whole length. The thickness of such products which have a rectangular (including "modified rectangular") cross-section exceeds one-tenth of the width. The expression also covers cast or sintered products, of the same forms and dimensions, which have been subsequently worked after production (otherwise than by simple trimming or de-scaling), provided that they have not thereby assumed the character of articles or products of other headings.
  b)  "Profiles": rolled, extruded, drawn, forged or formed products, coiled or not, of a uniform cross-section along their whole length, which do not conform to any of the definitions of bars, rods, wire, plates, sheets, strip, foil, tubes or pipes. The expression also covers cast or sintered products, of the same forms, which have been subsequently worked after production (otherwise than by simple trimming or de-scaling), provided that they have not thereby assumed the character of articles or products of other headings.
  c)  "Wire": rolled, extruded or drawn products, in coils, which have a uniform solid cross-section along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons (including "flattened circles" and "modified rectangles", of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel). Products with a rectangular (including square), triangular or polygonal cross-section may have corners rounded along their whole length. The thickness of such products which have a rectangular (including "modified rectangular") cross-section exceeds one-tenth of the width.
  d)  "Plates, sheets, strip and foil": flat-surfaced products (other than unwrought products of Heading 7601), coiled or not, of solid rectangular (other than square) cross-section with or without rounded corners (including "modified rectangles" of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel) of a uniform thickness, which are:
of rectangular (including square) shape with a thickness not exceeding one-tenth of the width,
of a shape other than rectangular or square, of any size, provided that they do not assume the character of articles or products of other headings.
Headings 7606 and 7607 apply inter alia to plates, sheets, strip and foil with patterns (for example, grooves, ribs, chequers, tears, buttons, lozenges) and to such products which have been perforated, corrugated, polished or coated, provided that they do not thereby assume the character of articles or products of other headings.
  e)  "Tubes and pipes": hollow products, coiled or not, which have a uniform cross-section with only one enclosed void along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons, and which have a uniform wall thickness. Products with a rectangular (including square), equilateral triangular or regular convex polygonal cross-section, which may have corners rounded along their whole length, are also to be considered as tubes and pipes provided the inner and the outer crosssections are concentric and have the same form and orientation. Tubes and pipes of the foregoing cross-sections may be polished, coated, bent, threaded, drilled, waisted, expanded, cone-shaped or fitted with flanges, collars or rings.
Subheading notes:
 1. In this Chapter the following expressions have the meanings hereby assigned to them:
  a)  "Aluminium, not alloyed": metal containing by weight at least 99% of aluminium, provided that the content by weight of any other element does not exceed the limit specified in the following table:
Other elements

Element Limiting content,
% by weight
Fe+Si (iron plus 1.0
silicon)
Other elements(1), each 0.1(2)
(1) Other elements are, for example, Cr, Cu, Mg, Mn, Ni, Zn.
(2) Copper is permitted in a proportion greater than 0.1% but not more
than 0.2%, provided that neither the chromium nor manganese content
exceeds 0.05%.

  b)  "Aluminium alloys": metallic substances in which aluminium predominates by weight over each of the other elements, provided that:
  i)  the content by weight of at least one of the other elements or of iron plus silicon taken together is greater than the limit specified in the foregoing table; or
ii) the total content by weight of such other elements exceeds 1%.
 2. Notwithstanding the provisions of Chapter Note 1c, for the purposes of Subheading 7616 91 the term "wire" applies only to products, whether or not in coils, of any cross-sectional shape, of which no cross-sectional dimension exceeds 6 mm.

CC FEA Description Suppl. Rate of import
Code unit customs duty
of (as a per cent
measu- of the customs
rement value or
in euros)
7601 Unwrought aluminium:
7601 10 000 0 - aliminium, not alloyed - 10
7601 20 - aluminium alloys:
7601 20 100 0 - - primary - 10
- - secondary:
7601 20 910 0 - - - in ingots or in liquid - 10
state
7601 20 990 0 - - - other - 10
7602 00 Aluminium waste and scrap:
- waste:
7602 00 110 0 - - turnings, shavings, chips, - 10
milling waste, sawdust and
filings; waste of coloured,
coated or bonded sheets and
foil, of a thickness (excluding
any backing) not exceeding 0.2 mm
7602 00 190 0 - - other (including factory - 10
rejects)
7602 00 900 0 - scrap - 10
7603 Aluminium powders and flakes:
7603 10 000 0 - powders of non-lamellar - 10
structure
7603 20 000 0 - powders of lamellar structure; - 10
flakes
7604 Aluminium bars, rods and
profiles:
7604 10 - of aluminium, not alloyed:
7604 10 100 0 - - bars and rods - 10
7604 10 900 0 - - profiles: - 20
- of aluminium alloys:
7604 21 000 0 - - hollow profiles - 20
7604 29 - - other:
7604 29 100 0 - - - bars and rods - 10
7604 29 900 0 - - - profiles - 20
7605 Aluminium wire:
- of aluminium, not alloyed:
7605 11 000 0 - - of which the maximum - 10
cross-sectional dimension exceeds
7 mm
7605 19 000 0 - - other - 10
- of aluminium alloys:
7605 21 000 0 - - of which the maximum - 10
crass-sectional dimension exceeds
7 mm
7605 29 000 0 - - other - 10
7606 Aluminium plates, sheets and
strip, of a thickness exceeding
0.2 mm:
- rectangular (including square):
7606 11 - - of aluminium, not alloyed:
7606 11 100 0 - - - painted, varnished or - 20
coated with plastics
- - - other, of a thickness of:
7606 11 910 0 - - - - less than 3 mm: - 20
7606 11 930 0 - - - - not less than 3 mm but - 20
less than 6 mm
7606 11 990 0 - - - - not less than 6 mm - 20
7606 12 - - of aluminium alloys:
7606 12 100 0 - - - strip for venetian blinds - 20
- - - other:
7606 12 500 0 - - - - painted, varnished or - 20
coated with plastics
- - - - other, of a thickness of:
7606 12 910 0 - - - - - less than 3 mm - 20
7606 12 930 0 - - - - - not less than 3 mm but - 20
less than 6 mm
7606 12 990 0 - - - - - not less than 6 mm - 20
- other:
7606 91 000 0 - - of aluminium, not alloyed - 20
7606 92 000 0 - - of aluminium alloys - 20
7607 Aluminium foil (whether or not
printed or backed with paper,
paperboard, plastics or similar
backing materials), of a
thickness (excluding any backing)
not exceeding 0.2 mm:
- not backed:
7607 11 - - rolled but not further
worked:
7607 11 100 0 - - - of a thickness of less than - 20
0.021 mm
7607 11 900 0 - - - of a thickness of not less - 20
than 0.021 mm but not more than
0.2 mm
7607 19 - - other:
7607 19 100 0 - - - of a thickness of less than - 20
0.021 mm
- - - of a thickness of not less
than 0.021 mm but not more than
0.2 mm:
7607 19 910 0 - - - - self-adhesive - 20
7607 19 990 0 - - - - other - 20
7607 20 - backed:
7607 20 100 0 - - of a thickness (excluding any - 20
backing) of less than 0.021 mm
- - of a thickness (excluding any
backing) of not less than 0.021
mm but not more than 0.2 mm:
7607 20 910 0 - - - self-adhesive - 20
7607 20 990 0 - - - other - 20
7608 Aluminium tubes and pipes:
7608 10 - of aluminium, not alloyed:
7608 10 100 0 - - with attached fittings, - 20
suitable for conducting gases or
liquids, for use in civil
aircraft
7608 10 900 0 - - other - 20
7608 20 - of aluminium alloys:
7608 20 100 0 - - with attached fittings, - 20
suitable for conducting gases or
liquids, for use in civil
aircraft
- - other:
7608 20 300 0 - - - welded - 20
- - - other:
7608 20 910 0 - - - - not further worked than - 20
extruded
7608 20 990 0 - - - - other - 20
7609 00 000 0 Aluminium tube or pipe fittings - 10
(for example, couplings, elbows,
sleeves)
7610 Aluminium structures (excluding
prefabricated buildings of
Heading 9406) and parts of
strutures (for example, bridges
and bridge-sections, towers,
lattice masts, roofs, roofing
frameworks, doors and windows and
their frames, and thresholds for
doors, balustrades, pillars and
columns); aluminium plates, rods,
profiles, tubes and the like,
prepared for use in structures:
7610 10 000 0 - doors, windows and their frames - 20
and thresholds for doors
7610 90 - other:
7610 90 100 0 - - bridges and bridge-sections, - 20
towers and lattice masts
7610 90 900 0 - - other - 20
7611 00 000 0 Aluminium reservoirs, tanks, vats - 10
and similar containers, for any
material (other than compressed
or liquefied gas), measuring in
capacity over 3OO litres, whether
or not lined or heat-insulated,
but not fitted with mechanical or
thermal equipment
7612 Aluminium casks, drums, cans,
boxes and similar containers
(including rigid or collapsible
tubular containers), for any
material (other than compressed
or liquefied gas), of a capacity
not exceeding 3OO litres, whether
or not lined or heat-insulated,
but not fitted with mechanical or
thermal equipment:
7612 10 000 0 - collapsible tubular containers - 10
7612 90 - other:
7612 90 100 - - rigid tubular containers:
7612 90 100 1 - - - with a capacity of not more - 20 but not less
than 1 litre than 41 euros
per 1000 pieces
7612 90 100 9 - - - other - 10
7612 90 200 0 - - containers of a kind used for pcs. 10
aerosols
- - other, with a capacity of:
7612 90 910 0 - - - 50 litres or more - 10
7612 90 980 0 - - - less than 50 litres - 10
7613 00 000 0 Aluminium containers for - 10
compressed or liquefied gas
7614 Stranded wire, cables, plaited
bands and the like, of aluminium,
not electrically insulated:
7614 10 000 0 - with steel core - 10
7614 90 000 0 - other - 10
7615 Table, kitchen or other household
articles and parts thereof, of
aluminium; pot scourers and
scouring or polishing pads,
gloves and the like, of
aluminium; sanitary ware and
parts thereof, of aluminium:
- table, kitchen or other
household articles and parts
thereof; pot scourers and
scouring or polishing pads,
gloves and the like:
7615 11 000 0 - - pot scourers and scouring or - 10 but not less
polishing pads, gloves and the than 0.5 euro
like per 1 kg
7615 19 - - other:
7615 19 100 0 - - - cast - 10 but not less
than 0.5 euro
per 1 kg
7615 19 900 0 - - - other - 10 but not less
than 0.5 euro
per 1 kg
7615 20 000 0 - sanitary ware and parts thereof - 10
7616 Other articles of aluminium:
7616 10 000 0 - nails, tacks, staples (other - 10
than those of Heading 8305),
screws, bolts, nuts, screw hooks,
rivets, cotters, cotter-pins,
washers and similar articles:
- other:
7616 91 000 0 - - cloth, grill, netting and - 10
fencing, of aluminium wire
7616 99 - - other:
7616 99 100 0 - - - cast - 10
7616 99 900 0 - - - other - 10

<< back forward >>
Content

Copyright © 2000 Open LLC

Page protected by COPYSCAPE do not copy
Please do not ever copy any of our content to a public Web server. Link to this pages instead. We guarantee not to break any of your links. The problem with you putting a page on your server is that the search engines will find it and send our readers to your server instead. Thus they will be deprived of our latest content and service innovations.

Our other sites:

The Customs Code of the Russian Federation
The Criminal Code of the Russian Federation
The Tax Code of the Russian Federation
The Civil Code of the Russian Federation
The Code of Administrative Offences of the Russian Federation
The Customs Tariff of the Russian Federation

eXTReMe Tracker