Here you can find information on outdoor furniture, plastic furniture and school furniture, as well as humidifier and garden tools and equipment.


Customs Tariff Of The Russian Federation

(with the Amendments and Additions of May 30, July 15, August 12, 20, 30, 31, November 1, 12, 19, 2002, February 25, March 11, April 11, 24, 28, June 5, 20, 21, 24, July 7, 16, August 8, 27, September 10, October 18, November 11, 13, 24, 29, December 23, 24, 2003, January 23, 2004)
Adopted by the State Duma on December 20, 2001
Endorsed by the Council of Federation on December 26, 2001

Section XV
Chapter 72
Iron and Steel
Chapter 73
Articles of Iron or Steel
Chapter 74
Copper and Articles Thereof
Chapter 75
Nickel and Articles Thereof
Chapter 76
Aluminium and Articles Thereof
Chapter 78
Lead and Articles Thereof
Chapter 79
Zinc and Articles Thereof
Chapter 80
Tin and Articles Thereof
Chapter 81
Other Base Metals; Cermets; Articles Thereof
Chapter 82
Tools, Implements, Cutlery, Spoons, and Forks, of BaseMetal; Parts Thereof of Base Metal
Chapter 83
Miscellaneous Articles of Base Metal

Chapter 74. Copper and Articles Thereof


Note:
 1. In this Chapter the following expressions have the meanings hereby assigned to them:
  a)  "Refined copper": metal containing at least 99.85% by weight of copper or metal containing at least 97.5% by weight of copper, provided that the content by weight of any other element does not exceed the limit specified in the following table:
Other elements

Elements Limiting content, %
by weight
Ag Silver 0.25
As Arsenic 0.5
Cd Cadmium 1.3
Cr Chromium 1.4
Mg Magnesium 0.8
Pb Lead 1.5
S Sulphur 0.7
Sn Tin 0.8
Te Tellurium 0.8
Zn Zink 1.0
Zr Zirconium 0.3
Other elements*, (each) 0.3
*Other elements are, for example, Al, Be, Co, Fe, Mn, Ni, Si

  b)  "Copper alloys": metallic substances other than unrefined copper in which copper predominates by weight over each of the other elements, provided that:
  i)  the content by weight of at least one of the other elements is greater than the limit specified in the foregoing table; or
ii) the total content by weight of such other elements exceeds than 2.5%.
  c)  "Master alloys": alloys containing with other elements more than 10% by weight of copper, not usefully malleable and commonly used as an additive in the manufacture of other alloys or as de-oxidants, desulphurizing agents or for similar uses in the metallurgy of non-ferrous metals.
However, copper phosphide (phosphor copper) containing more than 15% by weight of phosphorous falls within Heading 2848.
  d)  "Bars and rods": rolled, extruded, drawn or forged products, not in coils, which have a uniform solid cross-section along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons (including "flattened circles" and "modified rectangles", of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel). Products with a rectangular (including square), triangular or polygonal cross-section may have corners rounded along their whole length. The thickness of such products which have a rectangular (including "modified rectangular") cross-section exceeds one-tenth of the width. The expression also covers cast or sintered products, of the same forms and dimensions, which have been subsequently worked after production (otherwise than by simple trimming or de-scaling), provided that they have not thereby assumed the character of articles or products of other headings.
Wire-bars and billets with their ends tapered or otherwise workedsimply to facilitate their entry into machines for converting them into, for example, drawing stock (wire-rod) or tubes, are however to be taken to be unwrought copper of Heading 7403.
  e)  "Profiles": rolled, extruded, drawn, forged or formed products, coiled or not, of a uniform cross-section along their whole length, which do not conform to any of the definitions of bars, rods, wire, plates, sheets, strip, foil, tubes or pipes. The expression also covers cast or sintered products, of the same forms, which have been subsequently worked after production (otherwise than by simple trimming or de-scaling), provided that they have not thereby assumed the character of articles or products of other headings.
  f)  "Wire": rolled, extruded or drawn products, in coils, which have a uniform solid cross-section along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons (including "flattened circles" and "modified rectangles", of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel). Products with a rectangular (including square), triangular or polygonal cross-section may have corners rounded along their whole length. The thickness of such products which have a rectangular (including "modified rectangular") cross-section exceeds one-tenth of the width.
In the case of Heading 7414, however, the term "wire" applies only to products, whether or not in coils, of any cross-sectional shape, of which no cross-sectional dimension exceeds 6 mm.
  g)  "Plates, sheets, strip, and foil": flat-surfaced products (other than the unwrought products of Heading 7403), coiled or not, of solid rectangular (other than square) cross-section with or without rounded corners (including "modified rectangles" of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel) of a uniform thickness, which are:
of rectangular (including square) shape with a thickness not exceeding one-tenth of the width,
of a shape other than rectangular or square, of any size, provided that they do not assume the character of articles or products of other headings.
Headings 7409 and 7410 apply inter alia to plates, sheets, strip and foil with patterns (for example, grooves, ribs, chequers, tears, buttons, lozenges) and to such products which have been perforated, corrugated, polished or coated, provided that they do not thereby assume the character of articles or products of other headings.
  h)  "Tubes and pipes": hollow products, coiled or not, which have a uniform cross-section with only one enclosed void along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons, and which have a uniform wall thickness. Products with a rectangular (including square), equilateral triangular or regular convex polygonal cross-section, which may have corners rounded along their whole length, are also to be taken to be tubes and pipes provided the inner and outer cross-sections are concentric and have the same form and orientation. Tubes and pipes of the foregoing cross-sections may be polished, coated, bent, threaded, drilled, waisted, expanded, cone-shaped or fitted with flanges, collars or rings.
Subheading note:
 1. In this Chapter, the following expressions have the meanings hereby assigned to them:
  a)  "Copper-zinc base alloys (brasses)": alloys of copper and zinc, with or without other elements. When other elements are present:
zinc predominates by weight over each of such other elements;
any nickel content by weight is less than 5% (see copper-nickel-zinc alloys (nickel silvers)); and
any tin content by weight is less than 3% (see copper-tin alloys (bronzes)).
  b)  "Copper-tin base alloys (bronzes)": alloys of copper and tin, with or without other elements. When other elements are present, tin predominates by weight over each of such other elements, except that when the tin content is 3% or more, the zinc content by weight may exceed that of tin but must be less than 10%.
  c)  "Copper-nickel-zinc base alloys (nickel silvers)": alloys of copper, nickel and zinc, with or without other elements. The nickel content is 5% or more by weight (see copper-zinc alloys (brasses)).
  d)  "Copper-nickel base alloys": alloys of copper and nickel, with or without other elements but in any case containing by weight not more than 1% of zinc. When other elements are present, nickel predominates by weight over each of such other elements.

CC FEA Description Suppl. Rate of import
Code unit customs duty
of (as a per cent
measu- of the customs
rement value or
in euros)
7401 Copper mattes; cement copper
(precipitated copper):
7401 10 000 0 - copper mattes - 5
7401 20 000 0 - cement copper (precipitated - 5
copper)
7402 00 000 0 Unrefined copper; copper anodes - 5
for electrolytic refining
7403 Refined copper and copper alloys,
unwrought:
- refined copper:
7403 11 000 0 - - cathodes and sections of - 5
cathodes
7403 12 000 0 - - wire-bars - 5
7403 13 000 0 - - billets - 5
7403 19 000 0 - - other - 5
- copper alloys:
7403 21 000 0 - - copper-zinc base alloys - 5
(brass)
7403 22 000 0 - - copper-tin base alloys - 5
(bronze)
7403 23 000 0 - - copper-nickel base alloys - 5
(cupro-nickel) or
copper-nickel-zinc base alloys
(nickel silver)
7403 29 000 0 - - other copper alloys (other - 5
than master alloys of Heading
7405)
7404 00 Copper waste and scrap:
7404 00 100 0 - of refined copper - 5
- of copper alloys:
7404 00 910 0 - - of copper-zinc base alloys - 5
(brass)
7404 00 990 0 - - other - 5
7405 00 000 0 Master alloys of copper - 5
7406 Copper powders and flakes:
7406 10 000 0 - powders of non-lamellar - 5
structure
7406 20 000 0 - powders of lamellar structure; - 5
flakes
7407 Copper bars, rods and profiles:
7407 10 000 0 - of refined copper - 5
- of copper alloys
7407 21 - - of copper-zinc base alloys
(brass):
7407 21 100 0 - - - bars and rods - 5
7407 21 900 0 - - - profiles - 5
7407 22 - - of copper-nickel base alloys
(cupro-nickel) or
copper-nickel-zinc base alloys
(nickel silver):
7407 22 100 0 - - - of copper-nickel base - 5
alloys (cupro-nickel)
7407 22 900 0 - - - of copper-nickel-zinc base - 5
alloys (nickel silver)
7407 29 000 0 - - other - 5
7408 Copper wire:
- of refined copper:
7408 11 000 0 - - of which the maximum - 5
cross-sectional dimension exceeds
6 mm
7408 19 - - other:
7408 19 100 0 - - - of which the maximum - 5
cross-sectional dimension exceeds
0.5 mm
7408 19 900 0 - - - of which the maximum - 5
cross-sectional dimension does
not exceed 0.5 mm
- of copper alloys:
7408 21 000 0 - - of copper-zinc base alloys - 5
(brass)
7408 22 000 0 - - of copper-nickel base alloys - 5
(cupro-nickel) or
copper-nickel-zinc base alloys
(nickel silver)
7408 29 000 0 - - other - 5
7409 Copper plates, sheets and strip,
of a thickness exceeding 0.15 mm:
- of refined copper:
7409 11 000 0 - - in coils - 5
7409 19 000 0 - - other - 5
- of copper-zinc base alloys
(brass):
7409 21 000 0 - - in coils - 5
7409 29 000 0 - - other - 5
- of copper-tin base alloys
(bronze):
7409 31 000 0 - - in coils - 5
7409 39 000 0 - - other - 5
7409 40 - of copper-nickel base alloys
(cupro-nickel) or
copper-nickel-zinc base alloys
(nickel silver):
7409 40 100 0 - - of copper-nickel base alloys - 5
(cupro-nickel)
7409 40 900 0 - - of copper-nickel-zinc base - 5
alloys (nickel silver)
7409 90 000 0 - of other copper alloys - 5
7410 Copper foil (whether or not
printed or backed with paper,
paperboard, plastics or similar
backing materials) of a thickness
(excluding any backing) not
exceeding 0.15 mm:
- not backed:
7410 11 000 0 - - of refined copper - 5
7410 12 000 0 - - of copper alloys - 5
- backed:
7410 21 000 0 - - of refined copper - 5
7410 22 000 0 - - of copper alloys - 5
7411 Copper tubes and pipes:
7411 10 - of refined copper:
- - straight, of a wall
thickness:
7411 10 110 0 - - - exceeding 0.6 mm - 5
7411 10 190 0 - - - not exceeding 0.6 mm - 5
7411 10 900 0 - - other - 5
- of copper alloys:
7411 21 - - of copper-zinc base alloys
(brass):
7411 21 100 0 - - - straight - 5
7411 21 900 0 - - - other - 5
7411 22 000 0 - - of copper-nickel base alloys - 5
(cupro-nickel) or
copper-nickel-zinc base alloys
(nickel silver)
7411 29 000 0 - - other - 5
7412 Copper tube or pipe fittings (for
example, couplings, elbows,
sleeves):
7412 10 000 0 - of refined copper - 5
7412 20 000 0 - of copper alloys - 5
7413 00 Stranded wire, cables, plaited
bands and the like, of copper,
not electrically insulated:
7413 00 100 0 - with fittings attached, for use - 5
in civil aircraft
- other:
7413 00 910 0 - - of refined copper - 5
7413 00 990 0 - - of copper alloys - 5
7414 Cloth (including endless bands),
grill and netting, of copper
wire; expanded metal, of copper:
7414 20 000 0 - cloth - 5
7414 90 000 0 - other - 5
7415 Nails, tacks, drawing pins,
staples (other than those of
Heading 8305) and similar
articles, of copper or of iron or
steel with heads of copper;
screws, bolts, nuts, screw hooks,
rivets, cotters, cotter-pins,
washers (including spring
washers) and similar articles, of
copper:
7415 10 000 0 - nails and tacks, drawing pins, - 5
staples, and similar articles
- other articles, not threaded:
7415 21 000 0 - - washers (including spring - 5
washers)
7415 29 000 0 - - other - 5
- other threaded articles:
7415 33 000 0 - - screws; bolts and nuts - 5
7415 39 000 0 - - other - 5
7416 00 000 0 Copper springs - 5
7417 00 000 0 Cooking or heating apparatus of a - 5
kind used for domestic purposes,
non-electric, and parts thereof,
of copper
7418 Table, kitchen or other household
articles and parts thereof, of
copper; pot scourers and scouring
or polishing pads, gloves and the
like, of copper; sanitary ware
and parts thereof, of copper:
- table, kitchen or other
household articles and parts
thereof; pot scourers and
scouring or polishing pads,
gloves and the like:
7418 11 000 0 - - pot scourers and scouring or - 5
polishing pads, gloves and the
like
7418 19 000 0 - - other - 5
7418 20 000 0 - sanitary ware and parts thereof - 5
7419 Other articles of copper:
7419 10 000 0 - chain and parts thereof - 5
- other:
7419 91 000 0 - - cast, moulded, stamped or - 5
forged but not further worked
7419 99 000 0 - - other - 5

<< back forward >>
Content

Copyright © 2000 Open LLC

Page protected by COPYSCAPE do not copy
Please do not ever copy any of our content to a public Web server. Link to this pages instead. We guarantee not to break any of your links. The problem with you putting a page on your server is that the search engines will find it and send our readers to your server instead. Thus they will be deprived of our latest content and service innovations.

Our other sites:

The Customs Code of the Russian Federation
The Criminal Code of the Russian Federation
The Tax Code of the Russian Federation
The Civil Code of the Russian Federation
The Code of Administrative Offences of the Russian Federation
The Customs Tariff of the Russian Federation

eXTReMe Tracker