Customs Tariff Of The Russian Federation

(with the Amendments and Additions of May 30, July 15, August 12, 20, 30, 31, November 1, 12, 19, 2002, February 25, March 11, April 11, 24, 28, June 5, 20, 21, 24, July 7, 16, August 8, 27, September 10, October 18, November 11, 13, 24, 29, December 23, 24, 2003, January 23, 2004)
Adopted by the State Duma on December 20, 2001
Endorsed by the Council of Federation on December 26, 2001

Section VII
Chapter 39
Plastics and Articles Thereof
Chapter 40
Rubber and Articles Thereof

Notes:
 1. Goods put up in sets consisting of two or more separate constituents, some or all of which fall in this Section and are intended to be mixed together to obtain a product of Section VI or VII, are to be classified in the heading appropriate to that product, provided that the constituents are:
  a)  having regard to the manner in which they are put up, clearly identifiable as being intended to be used together without first being repacked;
  b)  presented together; and
  c)  identifiable, whether by their nature or by the relative proportions in which they are present, as being complementary one to another.
 2. Except for the goods of Headings 3918 or 3919, plastics, rubber, and articles thereof, printed with motifs, characters or pictorial representations, which are not merely incidental to the primary use of the goods, fall within Chapter 49.

Chapter 39. Plastics and Articles Thereof


Notes:
 1. Throughout the Nomenclature the expression "plastics" means materials of Headings 3901 to 3914 which are have been capable, either at the moment of polymerisation or at some subsequent stage, of being formed under external influence (usually heat and pressure, if necessary with a solvent or plasticiser) by moulding, casting, extruding, rolling or other process into shapes which are retained on the removal of the external influence.
Throughout the Nomenclature any reference to "plastics" also includes vulcanised fiber. The expression, however, does not apply to materials regarded as textile materials of Section XI.
 2. This Chapter does not cover:
  a)  waxes of Headings 2712 or 3404;
  b)  separate chemically defined organic compounds (Chapter 29);
  c)  heparin or its salts (Heading 3001);
  d)  solutions (other than collodions) consisting of any of the products specified in Headings 3901 to 3913 in volatile organic solvents when the weight of the solvent exceeding 50% of the weight of the solution (Heading 3208); stamping foils of Heading 3212;
  e)  organic surface-active agents or preparations of Heading 3402;
  f)  run gums or ester gums (Heading 3806);
  g)  diagnostic or laboratory reagents on a backing of plastics (Heading 3822);
  h)  synthetic rubber, as defined for the purposes of Chapter 40, or articles thereof;
ij) saddlery of harness (Heading 4201) or trunks, suitcases, handbags or other containers of Heading 4202;
  k)  plaits, wickerwork or other articles of Chapter 46;
  l)  wall coverings of Heading 4814;
  m)  goods of Section XI (textiles and textile articles);
  n)  articles of Section XII (for example, footwear, headgear, umbrellas, sum umbrellas, walking-sticks, whips, riding-crops or parts thereof);
  o)  imitation jewellery of Heading 7117;
  p)  articles of Section XVI (machines and mechanical or electric appliances);
  q)  parts of aircraft or vehicles of Section XVII;
  r)  articles of Chapter 90 (for example, optical elements, spectacle frames, drawing instruments);
  s)  articles of Chapter 91 (for example, clock or watch cases);
  t)  articles of Chapter 92 (for example, musical instruments or parts thereof);
  u)  articles of Chapter 94 (for example, furniture, lamps and lighting fittings, illuminated signs, prefabricated buildings);
  v)  articles of Chapter 95 (for example, toys, games, sports requisites); or
  w)  articles of Chapter 96 (for example, brushes, buttons, slide fasteners, combs, mouthpieces or stems for smoking pipes, cigaretteholders or the like, parts of vacuum flasks or the like, pens, propelling pencils).
 3. Headings 3901 to 3911 apply only to goods of a kind produced by chemical synthesis, falling in the following categories:
  a)  liquid synthetic polyolefins of which less than 60% by volume distils at 300C, after conversion to 1013 mbar when a reduced-pressure distillation method is used (Headings 3901 and 3902);
  b)  resins, not highly polymerised, of the coumarone-indene type (Heading 3911);
  c)  other synthetic polymers with an average of at least five monomer units;
  d)  silicones (Heading 3910);
  e)  resols (Heading 3909) and other prepolymers.
 4. The expression "copolymers" covers all polymers in which no single monomer unit contributes 95% or more by weight to the total polymer content.
For the purposes of this Chapter, except where the context otherwise requires, copolymers (including co-polycondensates, co-polyaddition products, block copolymers and graft copolymers) and polymer blends are to be classified in the Heading covering polymers of that comonomer unit which predominates by weight over every other single comonomer unit. For the purposes of this Note, constituent comonomer units of polymers falling in the same Heading shall be taken together.
If no single comonomer unit predominates, copolymers or polymer blends, as the case may be, are to be classified in the Heading which occurs last in numerical order among those which equally merit consideration.
 5. Chemically modified polymers, that is those in which only appendages to the main polymer chain have been changed by chemical reaction, are to be classified in the Heading appropriate to the unmodified polymer. This provision does not apply to graft copolymers.
 6. In Headings 3901 to 3914, the expression "primary forms" applies only to the following forms:
  a)  liquids and pastes, including dispersions (emulsions and suspensions) and solutions;
  b)  blocks of irregular shape, lumps, powders (including moulding powders), granules, flakes, and similar bulk forms.
 7. Heading 3915 does not apply to waste, parings and scrap or a single thermoplastic material, transformed into primary forms (Headings 3901 to 3914).
 8. For the purposes of Heading 3917, the expression "tubes, pipes, and hoses" means hollow products, whether semi-manufactures or finished products, of a kind generally used for conveying, conducting or distributing gases or liquids (for example, ribbed garden hose, perforated tubes). This expression also includes sausage casings and other lay-flat tubing. However, except for the last mentioned, those having an internal cross-section other than round, oval, rectangular (in which the length does not exceed one-and-a-half times the width) or in the shape of a regular polygon are not to be regarded as tubes, pipes and hoses but as profile shapes.
 9. For the purposes of Heading 3918, the expression "wall or ceiling coverings of plastics" applies to products in rolls, of width not less than 45 cm, suitable for wall or ceiling decoration, consisting of plastics fixed permanently on a backing of any material other than paper, the layer of plastics (on the face side) being grained, embossed, coloured, design-printed or otherwise decorated.
 10. In Headings 3920 and 3921, the expression "plates, sheets, film, foil and strip" applies only to plates, sheets, film, foil and strip (other than those of Chapter 54), and to blocks of regular geometric shape, whether or not printed or otherwise surface-worked, uncut or cut into rectangles (including squares) but not further worked (even if when so cut they become articles ready for use).
 11. Heading 3925 applies only to the following articles, not being products covered by any of the earlier headings of Subchapter II:
  a)  reservoirs, tanks (including septic tanks), vats and similar containers, of a capacity exceeding 300 liters;
  b)  structural elements used, for example, in floors, walls or partitions, ceiling or roofs;
  c)  gutters and fittings there for;
  d)  doors, windows and their frames and thresholds for doors;
  e)  balconies, balustrades, fencing, gates and similar barriers;
  f)  shutters, blinds (including venetian blinds) and similar articles and parts and fittings thereof;
  g)  large-scale shelving for assembly and permanent installation, for example, in shops, workshops, warehouses;
  h)  ornamental architectural features, for example, flutings, cupolas, dovecotes;
ij) fittings and mountings intended for permanent installation in or on doors, windows, staircases, walls or other parts of buildings, for example, knobs, handles, hooks, brackets, towel rails, switch-plates, and other protective plates.
Subheading notes:
 1. Within any one heading of this Chapter, polymers (including copolymers) and chemically modified polymers are to be classified according to the following provisions:
  a)  where there is a subheading named "Other" in the same series:
  1)  the designation in a subheading of a polymer by the prefix "poly" (e.g., polyethylene and polyamide-6,6) means that the constituent monomer unit or monomer units of the named polymer taken together must contribute 95% or more by weight to the total polymer content;
  2)  the copolymers named in Subheadings 3901 30, 3903 20, 3903 30, and 3904 30 are to be classified in those subheadings, provided that the comonomer units of the named copolymers contribute 95% or more by weight to the total polymer content;
  3)  chemically modified polymers are to be classified in the subheading named "Other", provided that the chemically modified polymers are not more specifically covered by another subheading;
  4)  polymers not meeting (1), (2) or (3) above, are to be classified in the subheading, among the remaining subheadings in the series, covering polymers of that monomer unit which predominates by weight over every other single comonomer unit. For this purpose, constituent monomer units of polymers falling in the same subheading shall be taken together. Only the constituent comonomer units of the polymers in the series of subheadings under consideration are to be compared;
  b)  where there is no subheading named "Other" in the same series:
  1)  polymers are to be classified in the subheading covering polymers of that monomer unit which predominates by weight over every other single comonomer unit. For this purpose, constituent monomer units of polymers falling in the same subheading shall be taken together. Only the constituent comonomer units of the polymers in the series under consideration are to be compared;
  2)  Chemically modified polymers are to be classified in the subheading appropriate to the unmodified polymer.
Polymer blends are to be classified in the same subheading as polymers of the same monomer units in the same proportions.
 2. For the purposes of Subheading 3920 43, the term "plasticizers" means secondary plasticizers.

CC FEA Description Suppl. Rate of import
Code unit customs duty
of (as a per cent
measu- of the customs
rement value or
in euros)
I. Primary Forms
3901 Polymers of ethylene, in primary
forms:
3901 10 - polyethylene having a specific
gravity of less than 0.94:
3901 10 100 0 - - linear polyethylene - 10
3901 10 900 0 - - other - 10
3901 20 - polyethylene having a specific - 10
gravity of 0.94 or more:
3901 20 100 0 - - Polyethylene, in one of the - 10
forms mentioned in Note 6b to
this Chapter, of a specific
gravity of 0.958 or more at 23C,
containing: - not more than 50
mg/kg of aluminium, - not more
than 2 mg/kg of calcium, - not
more than 2 mg/kg of chromium, -
not more than 2 mg/kg of iron, -
not more than 2 mg/kg of nickel,
- not more than 2 mg/kg of
titanium, - not more than 8 mg/kg
of vanadium, for the manufacture
of chlorosulphonated polyethylene
3901 20 900 0 - - other - 10
3901 30 000 0 - ethylene-vinyl acetate - 10
copolymers
3901 90 - other:
3901 90 100 0 - - ionomer resin consisting of - 10
a salt of a terpolymer of
ethylene, isobutyl acrylate, and
methacrylic acid
3901 90 200 0 - - A-B-A block-copolymer of - 10
polystyrene, ethylene-butylene
copolymer and polystyrene,
containing by weight 35% or less
of styrene, in one of the forms
mentioned in Note 6b) to Chapter
39
3901 90 900 0 - - other - 10
3902 Polymers of propylene or of other
olefins, in primary forms:
3902 10 000 0 - polypropylene - 10
3902 20 000 0 - polyisobutylene - 10
3902 30 000 0 - propylene copolymers - 10
3902 90 - other:
3902 90 100 0 - - A-B-A block-copolymer of - 10
polystyrene, ethylene-butylene
copolymer and polystyrene,
containing by weight not more
than 35% of styrene, in one of
the forms mentioned in Note 6b)
to this Chapter
3902 90 200 0 - - polybut-1-ene, a copolymer of - 10
but-1-ene with ethylene
containing by weight 10% or less
of ethylene, or a blend of
polybut-1-ene with polyethylene
and/or polypropylene containing
by weight 10% or less of
polyethylene and/or 25% or less
of polypropylene, in one of the
forms mentioned in Note 6b to
this Chapter
3902 90 900 0 - - other - 10
3903 Polymers of styrene, in primary
forms:
- polystyrene:
3903 11 000 0 - - expansible - 10
3903 19 000 - - other:
3903 19 000 1 - - - freon-resistant polystyrene - 5
3903 19 000 9 - - - other - 10
3903 20 000 0 - styrene-acrylonitrile (SAN) - 10
copolymers
3903 30 000 0 - acrylonitrile-butadiene-styrene - 10
(ABS) copolymers
3903 90 - other:
3903 90 100 0 - - copolymers, solely of allyl - 10
alcohol with styrene, which have
an acetyl value of not less than
175
3903 90 200 0 - - brominated polystyrene, - 10
containing by weight 58% or more
but not more than 71% of bromine,
in one of the forms mentioned in
Note 6b to this Chapter
3903 90 900 0 - - other - 10
3904 Polymers of vinyl chloride or of
other halogenated olefins, in
primary forms:
3904 10 00 - polyvinylchloride, not mixed
with any other substances:
3904 10 001 0 - - paste-forming - 5
polyvinylchloride emulsifying
resin (moisture content 0.2% by
weight; emulsifying agent (salts
of aliphatic and carbonic acids)
content 0.1% by weight; alkali
content 0.1% by weight;
vinylchloride content 0.6% by
weight) for making foam linoleum
with a chemical foam stamping and
reinforced transparent layer (of
Inavil EP-724, Inavil EP-705,
Solvik 367NC type brands)
- other polyvinyl chloride:
3904 10 009 0 - - other: -
3904 10 009 1 - - - paste-forming polyvinyl - 5
chloride emulsion, micro-
suspension and polyvinyl
chloride extender resins with the
mass of sulphatic as not
exceeding 0.25%
3904 10 009 9 - - - other - 15
3904 21 000 0 - - non-plasticized - 10
3904 22 000 0 - - plasticized - 10
3904 30 000 0 - vinyl chloride-vinyl acetate - 10
copolymers
3904 40 000 0 - other vinyl chloride copolymers - 10
3904 50 - vinylidene chloride polymers:
3904 50 100 0 - - copolymer of vinylidene - 10
chloride with acrylonitrile, in
the form of expansible beads of a
diameter of 4 micrometres or more
but not more than 20 micrometres
3904 50 900 0 - - other - 10
- fluoro-polymers:
3904 61 000 0 - - polytetrafluoroethylene - 10
3904 69 - - other:
3904 69 100 0 - - - polyvinyl fluoride in one - 10
of the forms mentioned in Note 6b
to this Chapter
3904 69 900 0 - - - other - 10
3904 90 000 0 - other - 10
3905 Polymers of vinyl acetate or of
other vinyl esters, in primary
forms; other vinyl polymers in
primary forms:
- polyvinyl acetate:
3905 12 000 0 - - in aqueous dispersion - 10
3905 19 000 0 - - other - 10
- vinyl acetate copolymers:
3905 21 000 0 - - in aqueous dispersion - 10
3905 29 000 0 - - other - 10
3905 30 000 0 - polyvinyl alcohol, whether or - 10
not containing unhydrolyzed
acetate groups
- other:
3905 91 000 0 - - copolymers - 10
3905 99 - - other:
3905 99 100 0 - - - poly(vinyl formal), in one - 10
of the forms mentioned in Note
6b to this Chapter, of a
molecular weight of 10 000 or
more but not exceeding 40 000
and containing by weight: - 9,5%
or more but not more than 13% of
acetyl groups, expressed as
vinyl acetate, - 5% or more but
not more than 6,5% of hydroxy
groups, expressed as vinyl
alcohol
3905 99 90 - - - other:
3905 99 901 0 - - - - polyvinylpyrrolidone - 10
3905 99 909 0 - - - - other - 10
3906 Acrylic polymers in primary
forms:
3906 10 000 0 - polymethyl methacrylate - 10 but not less than
0.2 euro per 1 kg
3906 90 - other:
3906 90 100 0 - - poly[N-(3-hydroxyimino-1,1- - 10
dimethylbutyl)acrylamide]
3906 90 200 0 - - copolymers of - 10
2-di-isopropylaminoethyl
methacrylate and decyl
methacrylate dissolved in
N,N-dimethylacetamide, with a
copolymer content of not less
than 55% by weight
3906 90 300 0 - - copolymer of acrylic acid - 10
with 2-ethylhexyl acrylate,
containing by weight 10% or more
but not more than 11% of
2-ethylhexyl acrylate
3906 90 400 0 - - copolymer of acrylonitrile - 10
and methylacrylate modified with
polybutadieneacrylonitrile (NBR)
3906 90 500 0 - - polymerization products of - 10
acrylic acid, with alkyl
methacrylate and small quantities
of other monomers for use as
thickners in the manufacture of
textile printing pastes
3906 90 600 0 - - copolymer of methyl acrylate - 10
with ethylene and a monomer
containing a non-terminal carboxy
group as a substituent,
containing by weight 50% or more
of methyl acrylate, whether or
not compounded with silica
3906 90 900 0 - - other - 10
3907 Polyacetals, other polyethers and
epoxide resins, in primary forms;
polycarbonates, alkyd resins,
polyallyl esters and other
polyesters, in primary forms:
3907 10 000 0 - polyacetals - 10
3907 20 - other polyethers:
- - polyether alcohols:
3907 20 110 0 - - - polyethylene glycols - 10
- - - other:
3907 20 210 0 - - - - with a hydroxyl number - 10
not exceeding 100
3907 20 290 0 - - - - other - 10
- - other:
3907 20 910 0 - - - copolymer of - 10
1-chloro-2,3-epoxypropane with
athylene axide
3907 20 990 0 - - - other - 10
3907 30 000 0 - epoxide resins - 10
3907 40 000 0 - polycarbonates - 10
3907 50 000 0 - alkyd resins - 10
3907 60 - polyethylene terephthalate:
3907 60 200 - - with intrinsic viscosity of
78 ml/g or more:
3907 60 200 1 - - - for the manufacture of - 10
pharmacentical products
3907 60 200 9 - - - other - 5
3907 60 800 - - other:
3907 60 800 1 - - - for the manufacture of - 10
pharmacentical products
3907 60 800 9 - - - other - 5
- other polyesters:
3907 91 - - unsaturated:
3907 91 100 0 - - - liquid - 10
3907 91 900 0 - - - other - 10
3907 99 - - other:
- - - with a hydroxyl number not
exceeding 100:
3907 99 110 0 - - - - poly(ethylene naphthalene - 10
-2,6-dicarbolylate)
3907 99 190 0 - - - - other - 10
- - - other:
3907 99 910 0 - - - - poly(ethylene naphthalene - 10
-2,6-dicarbolylate)
3907 99 990 0 - - - - other - 10
3908 Polyamides in primary forms:
3908 10 000 0 - polyamide -6, -11, -12, -6,6, - 10
-6,9, -6,10 or -6,12
3908 90 000 0 - other - 10
3909 Amino-resins, phenolic resins,
and polyurethanes, in primary
forms:
3909 10 000 0 - urea resins; thiourea resins - 10
3909 20 000 0 - melamine resins - 10
3909 30 000 0 - other amino-resins - 10
3909 40 000 0 - phenolic resins - 10
3909 50 - polyurethanes:
3909 50 100 0 - - polyurethane of - 10
2,2'-(tert-butylimino)diethanol
and 4,4'-methylenedicyclohexyl
diisocyanate, in the form of a
solution in
N,N-diamethylacetamide containing
by weight 50% or more of polymer
3909 50 900 0 - - other - 10
3910 00 000 0 Silicones in primary forms - 10
3911 Petroleum resins,
coumarone-indene resins,
polyterpenes, polysulphides,
polysulphones and other products
specified in Note 3 to this
Chapter, not elsewhere specified
or included, in primary forms:
3911 10 000 0 - petroleum resins, coumarone, - 10
indene or coumarone-indene resins
and polyterpenes
3911 90 - other:
- - condensation or rearrangement
polymerisation products whether
or not chemically modified:
3911 90 110 0 - - - poly(oxy-1,4- - 10
phenylenesulphonyl-1,4
-phenyleneoxy-1,4-
phenyleneisopropylidene-
1,4-phenylene) in one of the
forms mentioned in Note 6b to
this Chapter
3911 90 130 0 - - - poly(thio-1,4-phenylene) - 10
3911 90 190 0 - - - other - 10
- - other:
3911 90 910 0 - - - copolymer of p-cresol and - 10
divinylbenzene, in the form of a
solution in N,N-dimethylacetamide
containing by weight 50% or more
of polymer
3911 90 930 0 - - - hydrogenated copolymers of - 10
vinyltoluena and
alpha-methylstyrene
3911 90 990 0 - - - other - 10
3912 Cellulose and its chemical
derivatives, not elsewhere
specified or included, in primary
forms:
- cellulose acetates:
3912 11 000 - - non-plasticised:
3912 11 000 1 - - - for the manufacture of - 5
cigarette filters
3912 11 000 9 - - - other - 10
3912 12 000 0 - - plasticised - 5
3912 20 - cellulose nitrates (including
collodions):
- - non-plasticised:
3912 20 110 0 - - - collodions and celloidin - 10
3912 20 190 0 - - - other - 10
3912 20 900 0 - - plasticised - 10
- cellulose ethers:
3912 31 000 0 - - carboxymethylcellulose and - 10
its salts
3912 39 - - other:
3912 39 100 0 - - - ethylcellulose - 10
3912 39 200 0 - - - hydroxypropylcellulose - 10
3912 39 800 0 - - - other 10
3912 90 - other:
3912 90 100 0 - - cellulose esters - 10
3912 90 900 0 - - other - 10
3913 Natural polymers (for example,
alginic acid) and modified
natural polymers (for example,
hardened proteins, chemical
derivatives of natural rubber),
not elsewhere specified or
included, in primary forms:
3913 10 000 0 - alginic acid, its salts and - 10
esters
3913 90 - other:
3913 90 100 0 - - chemical derivatives of - 10
natural rubber
3913 90 200 0 - - amylopectin - 10
3913 90 300 0 - - amylose - 10
3913 90 800 0 - - other - 10
3914 00 000 0 Ion-exchangers based on polymers - 10
of Headings 3901 to 3913, in
primary forms
II. Waste, Parings and Scrap;
Semi-Manufactures; Articles
3915 Waste, parings and scrap, of
plastics:
3915 10 000 0 - of polymers of ethylene - 10
3915 20 000 0 - of polymers of styrene - 10
3915 30 000 0 - of polymers of vinyl chloride - 10
3915 90 - of other plastics:
- - of addition polymerization
products:
3915 90 110 0 - - - of polymers of propylene - 10
3915 90 130 0 - - - of acrylic polymers - 10
3915 90 190 0 - - - other - 10
- - other:
3915 90 910 0 - - - of epoxide resins - 10
3915 90 930 0 - - - of cellulose and its - 10
chemical derivatives
3915 90 990 0 - - - other - 10
3916 Monofilament of which any
cross-sectional dimension exceeds
1 mm, rods, sticks and profile
shapes, whether or not
surface-worked but not otherwise
worked, of plastics:
3916 10 000 0 - of polymers of ethylene - 10
3916 20 - of polymers of vinyl chloride:
3916 20 100 0 - - of polyvinyl chloride - 10
3916 20 900 0 - - other - 10
3916 90 - of other plastics:
- - of condensation or
rearrangement polymerization
products, whether or not
chemically modified:
3916 90 110 0 - - - of polyesters - 10
3916 90 130 0 - - - of polyamides - 10
3916 90 150 0 - - - of epoxide resins - 10
3916 90 190 0 - - - other - 10
- - of addition polymerisation
products:
3916 90 510 0 - - - of polymers of propylene - 10
3916 90 590 0 - - - other - 10
3916 90 900 0 - - other - 10
3917 Tubes, pipes, and hoses, and
fittings therefor (for example,
joints, elbows, flanges), of
plastics:
3917 10 - artificial guts (sausage
casings) of hardened protein or
of cellulose materials:
3917 10 100 0 - - of hardened protein - 10
3917 10 900 0 - - of cellulose materials - 10
- tubes, pipes, and hoses, rigid:
3917 21 - - of polymers of ethylene:
3917 21 100 0 - - - seamless and of a length - 10
exceeding the maximum
cross-sectional dimension,
whether or not surface-worked,
but not otherwise worked
- - - other:
3917 21 910 0 - - - - with fittings attached, - 10
for use in civil aircraft
3917 21 990 0 - - - - other - 10
3917 22 - - of polymers of propylene:
3917 22 100 0 - - - seamless and of a length - 10
exceeding the maximum
cross-sectional dimension,
whether or not surface-worked,
but not otherwise worked
- - - other:
3917 22 910 0 - - - - with fittings attached, - 10
for use in civil aircraft
3917 22 990 0 - - - - other - 10
3917 23 - - of vinyl chloride polymers:
3917 23 100 0 - - - seamless and of a length - 10
exceeding the maximum
cross-sectional dimension,
whether or not surface-worked,
but not otherwise worked
- - - other:
3917 23 910 0 - - - - with fittings attached, - 10
for use in civil aircraft
3917 23 990 0 - - - - other - 10
3917 29 - - of other plastics:
- - - seamless and of a length
exceeding the maximum
cross-sectional dimension,
whether or not surface-worked,
but not otherwise worked:
3917 29 120 0 - - - - of condensation or - 10
rearrangement polymerisation
products, whether or not
chemically modified
3917 29 150 0 - - - - of addition - 10
polymerization products
3917 29 190 0 - - - - other - 10
- - - other:
3917 29 910 0 - - - - with fittings attached, - 10
for use in civil aircraft
3917 29 990 0 - - - - other - 10
- other tubes, pipes and hoses:
3917 31 - - flexible tubes, pipes and
hoses, having a minimum burst
pressure of 27.6 MPa:
3917 31 100 0 - - - with fittings attached, for - 10
use in civil aircraft
3917 31 900 0 - - - other - 10
3917 32 - - other, not reinforced or
otherwise combined with other
materials, without fittings:
- - - seamless and of a length
exceeding the maximum
cross-sectional dimension,
whether or not surface-worked,
but not otherwise worked:
3917 32 100 0 - - - - of condensation or
rearrangement polymerisation
products, whether or not
chemically modified:
- - - - of addition
polymerisation products:
3917 32 310 0 - - - - - of polymers of ethylene - 10
3917 32 350 0 - - - - of polymers of vinyl - 10
chloride
3917 32 390 0 - - - - - other - 10
3917 32 510 0 - - - - other - 10
- - - other:
3917 32 910 0 - - - - artificial sausage - 10
casings
3917 32 990 0 - - - - other - 10
3917 33 - - other, not reinforced or
otherwise combined with other
materials, with fittings:
3917 33 100 0 - - - with fittings attached, - 10
for use in civil aircraft
3917 33 900 0 - - - other - 10
3917 39 - - other:
- - - seamless and of a length
exceeding the maximum
cross-sectional dimensions,
whether or not surface-worked,
but not otherwise worked:
3917 39 120 0 - - - - of condensation or - 10
rearrangement polymerisation
products, whether or not
chemically modified
3917 39 150 0 - - - - of addition - 10
polymerization products
3917 39 190 0 - - - - other - 10
- - - other:
3917 39 910 0 - - - - with fittings attached, - 10
for use in civil aircraft
3917 39 990 0 - - - - other - 10
3917 40 - fittings:
3917 40 100 0 - - for use in civil aircraft - 10
3917 40 900 0 - - other - 10
3918 Floor coverings of polymer
materials, whether or not
self-adhesive, in rolls or in the
form of tiles; wall or ceiling
coverings of polymers, as defined
in Note 9 to this Chapter:
3918 10 - of polymers of vinyl chloride:
3918 10 100 0 - - consisting of a support m2 20 but not less
impregnated, coated, or covered than 0.3 euro
with polyvinyl chloride per 1 kg
3918 10 900 0 - - other m2 20 but not less
than 0.3 euro
per 1 kg
3918 90 000 0 - of other plastics m2 20 but not less
than 0.3 euro
per 1 kg
3919 Self-adhesive plates, sheets,
film, foil, tape, strip and other
flat shapes, of polymer
materials, whether or not in
rolls:
3919 10 - in rolls of a width not
exceeding 20 cm:
- - strips, the coating of which
consists of unvulcanised natural
or synthetic rubber:
3919 10 110 0 - - - of plasticised polyvinyl - 10
chloride or of polyethylene
3919 10 130 0 - - - of non-plasticised - 10
polyvinyl chloride or of
polyethylene
3919 10 150 0 - - - of polypropylene - 10
3919 10 190 0 - - - other - 10
- - other:
- - - of condensation or
rearrangement polymerisation
products, whether or not
chemically modified:
3919 10 310 0 - - - - of polyesters - 10
3919 10 380 0 - - - - other - 10
- - - of addition
polymerization products:
3919 10 610 - - - - of plasticized polyvinyl
chloride or of polyethylene:
3919 10 610 1 - - - - - thermal moulding film - 10
of polyvinyl chloride for the
medical industry
3919 10 610 9 - - - - - other - 10
3919 10 690 0 - - - - other - 10
3919 10 900 0 - - - other - 10
3919 90 - other:
3919 90 100 0 - - further worked, other than - 10
surface-worked, or cut to shapes
other than rectangular (including
square)
- - other:
- - - of condensation or
rearrangement polymerisation
products, whether or not
chemically modified:
3919 90 310 0 - - - - of polycarbonates, alkyd - 10
resins, polyallyl esters or other
polyesters
3919 90 380 0 - - - - other - 10
- - - of addition polymerisation
products:
3919 90 610 0 - - - - of plasticized polyvinyl - 10
chloride or of polyethylene
3919 90 690 0 - - - - other - 10
3919 90 900 0 - - - other - 10
3920 Other plates, sheets, film, foil
and strip, of polymer materials,
non-cellular and not reinforced,
laminated, supported or similarly
combined with other materials:
3920 10 - of ethylene polymers:
- - of a thickness not exceeding
0.125 mm:
- - - of polyethylene having a
specific gravity of:
- - - - less than 0.94:
3920 10 230 0 - - - - - polyethylene film, of a - 10
thickness of 20 micrometres or
more but not exceeding 40
micrometres, for the production
of photo-resist film used in the
manufacture of semiconductors or
printed circuits
- - - - - other:
- - - - - - not printed:
3920 10 240 0 - - - - - - - drawn film - 10
3920 10 260 0 - - - - - - - other - 10
3920 10 270 0 - - - - - - printed - 10
3920 10 280 0 - - - - 0.94 or more - 10
3920 10 400 0 - - - other - 10
- - of a thickness exceeding
0.125 mm:
3920 10 810 0 - - - synthetic paper pulp, in - 10
the form of moist sheets made
from unconnected finely branched
polyethylene fibrils, whether or
not blended with cellulose fibres
in a quntity not exceeding 15%,
containing polyvinyl alcohol
dissolved in water as the
moistening agent
3920 10 890 0 - - - other - 10
3920 20 - of polymers of propylene:
- - of a thickness not exceeding
0.10 mm:
3920 20 210 0 - - - biaxially oriented - 10
3920 20 290 0 - - - other - 10
- - of a thickness exceeding 0.10
mm:
- - - strip of a width exceeding
5 mm but not exceeding 20 mm of a
kind used for packing:
3920 20 710 0 - - - - decorative strip - 10
3920 20 790 0 - - - - other - 10
3920 20 900 0 - - - other - 10
3920 30 000 0 - of polymers of styrene - 10
- of polymers of vinyl chloride:
3920 43 - - with plasticizers content not
less than 6% by weight:
3920 43 100 0 - - - of a thickness not - 10
exceeding 1 mm
3920 43 900 0 - - - of a thickness exceeding 1 - 10
mm
3920 49 - - other:
3920 49 100 0 - - - of a thickness not
exceeding 1 mm:
3920 49 100 1 - - - - rigid, non-plasticized - 15
3920 49 100 9 - - - - flexible - 10
3920 49 900 0 - - - of a thickness exceeding 1 - 10
mm
- of acrylic polymers:
3920 51 000 0 - - of polymethyl methacrylate - 10
3920 59 - - other:
3920 59 100 0 - - - copolymer of acrylic and - 10
methacrylic esters, in the form
of film of a thickness not
exceeding 150 micrometres
3920 59 900 0 - - - other - 10
- of polycarbonates, alkyd
resins, polyallyl esters or other
polyesters:
3920 61 000 0 - - of polycarbonates - 10
3920 62 - - of polyethylene
terephthalates:
- - - of a thickness not
exceeding 0.35 mm:
3920 62 110 0 - - - - polyethylene - 10
terephtbalate film, of a
thickness of 72 micrometres or
more but not exceeding 79
micrometres, for the manufacture
of flexible magnetic disks
3920 62 130 0 - - - - polyethylene - 10
terephtbalate film, of a
thickness of 100 micrometres or
more but not exceeding 150
micrometres, for use in the
manufacture of photopolymer
printing plates
3920 62 190 - - - - other:
3920 62 190 1 - - - - - film - 5
3920 62 190 9 - - - - - other - 10
3920 62 900 0 - - - of a thickness exceeding - 10
0.35 mm
3920 63 000 0 - - of unsaturated polyesters - 10
3920 69 000 0 - - of other polyesters - 10
- of cellulose or its chemical
derivatives:
3920 71 - - of regenerated cellulose:
3920 71 100 0 - - - sheets, film or strip, - 10*
coiled or not, of a thickness of
less than 0.75 mm
3920 71 900 0 - - - other - 10
3920 72 000 0 - - of vulcanized fiber - 10
3920 73 - - of cellulose acetate:
3920 73 100 0 - - - film in rolls or in strips, - 10
for cinematography or photography
3920 73 500 0 - - - sheets, film or strip, - 10
coiled or not, of a thickness of
less than 0.75 mm
3920 73 900 0 - - - other - 10
3920 79 000 0 - - of other cellulose - 10
derivatives
- of other plastics:
3920 91 000 0 - - of polyvinyl butyral - 10
3920 92 000 0 - - of polyamides - 10
3920 93 000 0 - - of amino-resins - 10
3920 94 000 0 - - of phenolic resins - 10
3920 99 - - of other polymer materials:
- - - of condensation or
rearrangement polymerisation
products, whether or not
chemically modified:
3920 99 210 0 - - - - polyimide sheet and strip, - 10
uncoated or coated or covered
solely with plastic
3920 99 280 0 - - - - other - 10
- - - of addition polymerisation
products:
3920 99 510 0 - - - - polyvinyl fluoride sheet - 10
3920 99 530 0 - - - - ion-exchange membranes of - 10
fluorcoated plastic material, for
use in chlor-alkali electrolytic
cells
3920 99 550 0 - - - - biaxially orientated - 10
polyvinyl alcohol film containing
not less than 97% by weight of
polyvinyl alcohol, uncoated, with
a thickness of not more than 1 mm
3920 99 590 0 - - - - other - 10
3920 99 900 0 - - - other - 10
3921 Other plates, sheets, film, foil
and strip, of polymer materials:
- cellular:
3921 11 000 0 - - of polymers of styrene - 10
3921 12 000 0 - - of polymers of vinyl chloride - 10
3921 13 - - of polyurethanes:
3921 13 100 0 - - - flexible - 10 but not less
than 0.3 euro
per 1 kg
3921 13 900 0 - - - other - 10 but not less
than 0.3 euro
per 1 kg
3921 14 000 0 - - of regenerated cellulose - 10
3921 19 000 0 - - of other plastics - 10
3921 90 - other:
- - of condensation or
rearrangement polymerisation
products, whether or not
chemically modified:
- - - of polyesters:
3921 90 110 0 - - - - corrugated sheets and - 10
plates
3921 90 190 - - - - other:
3921 90 190 1 - - - - - composite plate of - 10
polycarbonate
3921 90 190 9 - - - - - other - 10
3921 90 300 0 - - - of phenolic resins - 10
- - - of amino-resins:
- - - - laminated:
3921 90 410 0 - - - - - high-pressure laminated - 10
with a decorative surface on one
or both sides
3921 90 430 0 - - - - - other - 10
3921 90 490 0 - - - - other - 10
3921 90 500 0 - - - other - 10
3921 90 600 0 - - of addition polymerisation - 10
products
3921 90 900 0 - - other - 10
3922 Baths, shower-baths, wash-basins,
bidets, lavatory pans, seats and
covers, flushing cisterns and
similar sanitary ware, of
plastics:
3922 10 000 0 - baths, shower-baths and - 20
wash-basins
3922 20 000 0 - lavatory seats and covers - 20
3922 90 000 0 - other - 20
3923 Articles for the conveyance or
packing of goods, of plastics;
stoppers, lids, caps and other
closures, of plastics:
3923 10 000 0 - boxes, cases, crates and - 20
similar articles
- sacks and bags (including
cones):
3923 21 000 0 - - of polymers of ethylene - 20
3923 29 - - of other plastics:
3923 29 100 0 - - - of polyvinyl chloride - 20
3923 29 900 0 - - - other - 20
3923 30 - carboys, bottles, flasks and
similar articles:
3923 30 10 - - of a capacity not exceeding
two litres:
3923 30 101 0 - - - preforms - 10
3923 30 109 0 - - - other - 10
3923 30 90 - - of a capacity exceeding two
litres:
3923 30 901 0 - - - preforms - 20
3923 30 909 0 - - - other - 20
3923 40 - spools, cops, bobbins and
similar supports:
3923 40 100 - - spools, reels and similar
supports for photographic and
cinematographic film or for
tapes, films and the like,
falling within Headings 8523 and
8524:
3923 40 100 1 - - - cassettes for magnetic - 20
tapes of subsubheadings 8523 11
000 1, 8523 11 000 2, 8524 51 000
1, 8524 51 000 2
3923 40 100 2 - - - cassettes for magnetic - 20
tapes of subheadings 8523 13 000
1, 8523 13 000 9, 8524 53 000 1
and 8524 53 000 9
3923 40 100 9 - - - other - 20
3923 40 900 0 - - other - 20
3923 50 - stoppers, lids, caps and other
closures:
3923 50 100 0 - - caps and capsules for bottles - 10
3923 50 900 0 - - other - 10
3923 90 - other:
3923 90 100 0 - - netting extruded in tubular - 20
form
3923 90 900 0 - - other - 20
3924 Tableware, kitchenware, other
household articles and toilet
articles, of plastics:
3924 10 000 0 - tableware and kitchenware - 20 but not less
than 0.48 euro
per 1 kg
3924 90 - other:
- - of regenerated cellulose:
3924 90 110 0 - - - sponges - 20
3924 90 190 0 - - - other - 20
3924 90 900 0 - - other - 20 but not less
than 0.48 euro
per 1 kg
3925 Builders' ware of plastics, not
elsewhere specified or included:
3925 10 000 0 - reservoirs, tanks, vats and - 20
similar containers, of a capacity
exceeding 300 litres
3925 20 000 0 - doors, windows and their frames - 20
and thresholds for doors
3925 30 000 0 - shutters, blinds (including - 20
Venetian blinds) and similar
articles and parts thereof
3925 90 - other:
3925 90 100 0 - - fittings and mountings - 20
intended for permanent
installation in or on doors,
windows, staircases, walls or
other parts of buildings
3925 90 200 0 - - trunking, ducting and cable - 20
trays for electrical circuits
3925 90 800 0 - - other - 20
3926 Other articles of plastics and
articles of other materials of
Headings 3901 to 3914:
3926 10 000 0 - office or school supplies - 20 but not less
than 0.48 euro
per 1 kg
3926 20 000 0 - articles of apparel and - 20 but not less
clothing accessories (including than 0.48 euro
gloves) per 1 kg
3926 30 000 0 - fittings for furniture, - 20
coachwork or the like
3926 40 000 0 - statuettes and other ornamental - 20
articles
3926 90 - other:
3926 90 100 0 - - for technical uses, for use - 20
in civil aircraft
- - other:
3926 90 500 0 - - - perforated buckets and - 20 but not less
similar articles used to filter than 0.48 euro
water at the entrance to drains per 1 kg
- - - other:
3926 90 910 0 - - - - made from sheet - 20
3926 90 990 - - - - other:
3926 90 990 1 - - - - - filter elements - 10
(including membranes for
hemodialysis) for the medical
industry
3926 90 990 9 - - - - - other - 20 but not less
than 0.48 euro
per 1 kg

<< back forward >>
Content

Copyright © 2000 Open LLC

Page protected by COPYSCAPE do not copy
Please do not ever copy any of our content to a public Web server. Link to this pages instead. We guarantee not to break any of your links. The problem with you putting a page on your server is that the search engines will find it and send our readers to your server instead. Thus they will be deprived of our latest content and service innovations.

Our other sites:

The Customs Code of the Russian Federation
The Criminal Code of the Russian Federation
The Tax Code of the Russian Federation
The Civil Code of the Russian Federation
The Code of Administrative Offences of the Russian Federation
The Customs Tariff of the Russian Federation

eXTReMe Tracker